When I had enabled crc4 and it was not supported by the carrier, my LED
flashed from green to red very quickly.
[EMAIL PROTECTED] wrote:
Hi Louis-David,
Check without crc4
Best Regards,
Francois BERGERET.
-----Message d'origine-----
De : [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] De la part de Louis-David
Mitterrand
Envoyé : dimanche 23 avril 2006 09:39
À : [email protected]
Objet : [Asterisk-Users] TE410P card connection (was: Pinouts for
T1/E1crossover cable)
On Sat, Apr 22, 2006 at 11:59:21AM -0400, Alexander Lopez wrote:
Can't anyone stop self-promotion and tell the poor guy what he needs.
A T1/E1 X-over cable using an RJ-45 (8-cond.) is pinned out as
follows:
1 - 4
2 - 5
3 - NU
4 - 1
5 - 2
6 - NU
7 - NU
8 - NU
NU = Not Used
I have not in my experience seen any problems with using a Good
Quality Cat5 vs. Cat 3 (telco standard) cable for X-connects. YMMV,
but you should be fine. As far as the shielding goes, I use UTP cables
and Connectors all the time and some of my X-connects run over 100
feet.
Thanks for the info!
Should I use a T1 cross cable to connect the telco's socket to the
TE410P card?
When I tried straight cat5 cables, both leds remained red at each end.
However this E1 socket works fine with the Matra PBX, so it must be a
cable problem or TE410P misconfiguration.
Thanks,
Here is my configuration:
/etc/zaptel.conf:
span=1,1,0,ccs,hdb3,crc4
span=2,1,0,ccs,hdb3,crc4
span=3,1,0,ccs,hdb3,crc4
span=4,1,0,ccs,hdb3,crc4
bchan=1-15,17-31
dchan=16
bchan=32-46,48-62
dchan=47
bchan=63-77,79-93
dchan=78
bchan=94-108,110-124
dchan=109
loadzone=fr
defaultzone=fr
/etc/asterisk/zapata.conf:
;; to telco
context=default
signalling=pri_cpe
group = 1
channel => 1-15
channel => 17-31
;; to old pbx
context=international
signalling=pri_net
group = 2
channel => 32-46
channel => 48-62
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --
Asterisk-Users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --
Asterisk-Users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --
Asterisk-Users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
