I wrote:
> In the PAP2's setup there are all of these "Vertical Service Activation
> Codes" that start with star and "Outbound Call Codec Selection Codes",
> also the setup menu is accessed by pressing star four times, could they
> be intefering with dialing numbers that start with a star? And is there
> any way to get *8 and *XXX to dial?
Time Bandit wrote:
> Why I did to mine is modify all the internal "Vertical Service
> Activation Codes" to be "**x" instead of "*x". There is probably a
> better way, but this worked for me.
We tried that, but users report they are still having the same problem
(the site is located in a different country so I can't check myself).
Philippe Lindheimer wrote:
Yes - that's your problem. You need to porgram the dialpan in the PAP2
appropriately, disable functions you don't want, etc.
We were trying to dial *100, and there wasn't anything in either of the
Codes section that started with *1. Do we have to disable every
function that starts with a star to get anything to work? Also, is a
function disabled by clearing it?
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --
Asterisk-Users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
