On Fri, 2006-05-05 at 15:37 -0300, Lucas Alvarez wrote: > Hi, you have to forward port 5060 udp and all the others udp ports that > asterisk uses for RTP, 10000 to 20000 by default, see rtp.conf.
Thank you for the hint. The above part is clear. > At the sipura device in the server configuration you have to put the LAN > ip of your Asterisk box as sip proxy server and firewall's ip as > out-bound sip proxy. Where is the "server configuration" on the Sipura box, is it under "SIP" tab? Note: Sipura is running as a stand alone device behind NAT so there is no Asterisk. If I had an asterisk on the other end I would use IAX2. Just to be clear I will be connecting: Asterisk <--> NAT <--> Internet <--> NAT <--> Sipura-3K (No Asterisk) I'm force to to this way as FWD IAX is not reliable. -- #Joseph > > Joseph wrote: > > >Can anybody point or provide working configuration how to register > >Sipura to Asterisk over the Internet. Both Sipura and Asterisk are > >behind firewalls. > > > >I'll be force to use SIP as that is the only protocol that Sipura is > >using. > >Do I need to enter any "STUN Server:" setting in "SIP" tab. > > > >On Asterisk I think I only need to make changes in sip.conf isn't it? > >What ports do I need to open on my firewall? _______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- Asterisk-Users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
