On Tuesday 16 May 2006 20:39, M.Masri wrote: > AFAIK UPC cable phone is a voip phone, and not PSTN > Well, I tried to plug my KPN phone line into it as well with the same result. The PC refuses to answer using the fxsks protocol. I don't think these phone lines are IP carriers and suspect that UPC might turn the voice stream into something else in their modem. The phone however is a standard analogue device and I suspect you can stick anything you buy over the counter in there.
I also swapped the FXO module into the first slot with no different results. Config included below. The question is how to start figuring out what is going on since I don't see any messages in /var/log/asterisk/* or syslog that indicates there is a problem? lsmod includes zaptel 225284 1 wcfxs /etc/zaptel.conf defaultzone=nl fxsks=1 loadzone=nl /etc/asterisk/zapata.conf [channels] usecallerid=yes hidecallerid=no callwaiting=no threewaycalling=yes transfer=yes echocancel=yes echotraining=yes immediate=no context=incoming signalling=fxs_ks channel => 1 I am running ubuntu breezy and build the modules without much hastel from source. The only issue was it wanted gcc3.3 rather than gcc4 as a compiler and I had to remove the zaptel-source packages since it wrote a file that the zaptel-modules-2.6.10-5-386 wanted to overwrite. BTW. I also tried fxsls and fxsgs but nothing worked. I also received this error with fxsgs. Zaptel Configuration ====================== Channel map: Channel 01: FXS Groundstart (Default) (Slaves: 01) 1 channels configured. ZT_CHANCONFIG failed on channel 1: Invalid argument (22) Did you forget that FXS interfaces are configured with FXO signalling and that FXO interfaces use FXS signalling? Any help appreciated. Pieter _______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- Asterisk-Users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
