> Hmm, shouldn't you be loading wcfxo ? The configs look sane enough, most > things matching with an old X100P setup we have laying around. Most of > my work is on BRI/PRI systems though :-) > I thought the wcfxs module is used for fxo cards? Anyhow, if I load the wcfxo module, then I get errors with ztcfg (below).
ZT_CHANCONFIG failed on channel 1: No such device or address (6) Normally, if I load the wcfxs module and the zaptel module, then this is what I get (listed below). It all looks reasonable and the only issue seems to be that the card doens't answer the line. What does the zttool loopback test do? Is there a way to test the card? Thanks, Pieter [EMAIL PROTECTED]:~# ztcfg -vvvvvv Zaptel Configuration ====================== Channel map: Channel 01: FXS Kewlstart (Default) (Slaves: 01) 1 channels configured. [EMAIL PROTECTED]:~# cat /proc/zaptel/1 Span 1: WCTDM/0 "Wildcard TDM400P REV I Board 1" 1 WCTDM/0/0 FXSKS 2 WCTDM/0/1 3 WCTDM/0/2 4 WCTDM/0/3 _______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- Asterisk-Users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
