Cosmin Prund wrote:
Take a look on the Digium site for the requirements of the card. Most
likely the old computer can't handle the card.
M.Hockings wrote:
I just bought an TDM400P card with one FXS port and a X101P FXO card
to try and put together the beginnings of a PBX here. The computer
they are going in should arrive in a week. So I thought I would start
learning how to config the card in an IBM Aptiva we have here, an old
400Mhz P2 box. However when I put the TDM400P in the box the machine
won't POST. Does this mean that the card is bad or that the machine
can't handle this new PCI hardware?
If it matters the cards were purchased online at voipdepot.ca just
this week and arrived this morning.
Mike
Ahhh, I figured it out, what a dummy. I was using the power connector
from the DVD reader to power the TDM400P but didn't disconnect the
signal cable from the DVD so the BIOS was hanging on trying to read the
disks.
Mike
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --
Asterisk-Users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
