In my attempt to setup a single FXS line I have been following the
instructions for "Telephony Card Drivers" on the asteriskdocs.org site.
I have managed to checkout, make and install the zaptel code and can
load the zaptel module but when I attempt to load the wcfxs module it
tells me:
ZT_CHANCONFIG failed on channel 1: No such device or address (6)
FATAL: Error running install command for wctdm
On the card the single FXS module is in the position at the back of the
TDM400P (i.e., closest to the connectors)
In the /etc/zaptel.conf file I have put the following at the bottom of
the file:
fxoks=1
loadzone=us
defaultzone=us
I have also tried fxoks=4 with the same results other than that the
channel number changes in the message.
Any idea what I am configuring incorrectly ?
Mike
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --
Asterisk-Users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
