Hi, For me, in order to get the same sound level as for a direct IP/IP call I have the following values: rxgain=10 txgain=15
Unfortunately, with this setting there is a little bit of echo. To get a very small echo but with a lower audio level, the following values work for me: rxgain=0.8 txgain=0.8 By the way... how to interpret those vaules? Thanks, Dan ----- Original Message ----- From: "WipeOut" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Wednesday, October 29, 2003 10:37 AM Subject: Re: [Asterisk-Users] RX gain TX gain > Lists wrote: > > >I have an X100p card....and it is hard to hear the person on the other > >end. Should I mess with these values? I have heard both yes and no to > >this question in the past. If yes, how much louder should I make them? > > > >Thanks, > >MIchael > > > > > > > > Start with 0.5 and see if its too loud or not loud enough and adjust > accordingly.. > > _______________________________________________ > Asterisk-Users mailing list > [EMAIL PROTECTED] > http://lists.digium.com/mailman/listinfo/asterisk-users > > _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users
