Hi, ----- Original Message ----- From: "Robert L Mathews" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Friday, October 31, 2003 2:01 AM Subject: Re: [Asterisk-Users] RX gain TX gain
> ... > That is, routing an analog line => X101P => Asterisk => TDM10B => analog > phone is MUCH louder than if I just plug the same phone into the same > analog line directly. > > Some people have suggested that using a negative gain will make it > quieter, but I haven't had any luck with this. I *can* make it even > louder by increasing the gain -- if I use "rxgain = 10" on the TDM10B, > for example, it's so loud it sounds like the phone is going to explode -- > but using things like "rxgain = -3.0" or "rxgain = -10.0" doesn't make it > any quieter. I can't get it below the "rxgain = 0" value. Have you tried to use values like 0.5 or 0.8? Hope this help. It works for me. Dan _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users
