I've been using Asterisk 1.2.6 with a 4 port FXO Sangoma A200 card for the past month without many problems (other than the fact that the Sangoma card doesn't disconnect hung up calls immediately, which I posted about in another thread, and has still not been fixed), however, I had a call from one of our clients today and they complained that our phone system kept ringing through when they called.
It turns out that the Sangoma card had suddently decided to stop answering on channels 2,3 and 4, so if someone was using channel 1, then no other calls would be picked up. We could, however, make outgoing calls. I tried restarting Asterisk and it didn't make a difference. I then tried restarting the Wanrouter and it started working again. Has anyone else run into this problem? I really don't like the fact that I had to restart the wanrouter for the channels to start behaving normally again. Our phone system is basically useless if it randomly downgrades to a single line. I'm going to speak to Sangoma and see what they have to say about this, but until then, I was hoping someone might have some advice or suggestions for me to try. Thanks, Mike _______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- Asterisk-Users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
