G729 is your problem. Thanks, Steve Totaro http://www.asteriskhelpdesk.com
> -----Original Message----- > From: Lachek Butalek [mailto:[EMAIL PROTECTED] > Sent: Tuesday, May 30, 2006 10:10 AM > To: Asterisk Users Mailing List - Non-Commercial Discussion > Subject: Re: [Asterisk-Users] I guess my server capacity is ok > > What process is taking up 100% CPU? Is it Asterisk processes or > something else? Also, is the load spread out over multiple processes, > or do you have one or two processes taking up 90% or more of your > total? > > You also have dual CPUs (and hyperthreading, which to FC3 should look > like 4 CPUs if I'm not mistaken) - is the 100% CPU usage across all > two (or four) processors, or is it only CPU1 that peaks at 100%? Have > a look at "Last Used CPU" in top. What load are the other CPUs at? > > I don't have personal experience running that large of an > installation, but I imagine your system specs would allow you to > handle more simultaneous calls than 50, even though you're doing some > transcoding. > > On 5/30/06, Goke Aruna <[EMAIL PROTECTED]> wrote: > > can someone overthere help? > > > > the server specs are as follows > > HP DL380G4 Dual Intel Xeon 3.2GHz processor with 4GB RAM, > > running fedora core 3 > > asterisk-1.2.5 > > ss7-0.8.3d. > > using sip as advised to receive calls from another gateway in US. > > using g729 in transcoding way. > > > > however, I noticed the call hit the 51 active calls which is > 102channels, I > > run "top" to check the system resources usage and i discovered that the > cpu > > is 100% used. asterisk, sip, ss7 never crashed throughout. > > > > however, since transcoding takes alot of system resources.. how can I > use > > g729 in passthru mode. > > > > and I guess disabling hyperthreading will save me more system resouces. > > > > I will be glad, if you can give me more info on system management cos i > > think with that system, it should able to handle at least five E1's. > > > > I say thank you for finding time to reply my mail. > > > > goksie > > > > _______________________________________________ > > --Bandwidth and Colocation provided by Easynews.com -- > > > > Asterisk-Users mailing list > > To UNSUBSCRIBE or update options visit: > > > > http://lists.digium.com/mailman/listinfo/asterisk-users > > > > > > > _______________________________________________ > --Bandwidth and Colocation provided by Easynews.com -- > > Asterisk-Users mailing list > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users _______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- Asterisk-Users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users