Bart Fisher wrote:
I assume, the answer is using MGCP between the boxes. However, the
examples
I found don't really explain fully enough to know how to modify
examples to work for me.
Adit 600 TDM to a Digium T1 card
The goal would be able to route calls to and from ADIT from the T1's
to Asterisk and route some
Asterisk extensions to the FXS card.
I'll be looking to do this as well in a couple weeks.
I'll be getting a PRI from a local provider and am guessing that I'll
need a 2nd T1 to handle that and use the 1st T1 to handle the Adit. I
need to supply some analog lines to the facility. But currently, I have
all analog lines going to the punch down hooked into the Adit, from
there a T1 cross over cable from the Adit to the PRI card in the
Asterisk system. 2 FXO and 2 FXS cards. Around 5 analog phones hanging
off the FXS.
There is a section on the Wiki on the Adit:
http://www.voip-info.org/wiki/index.php?page=Asterisk%20hardware%20channel%20bank%20check
-- Ben Franklin quote: "Those who would give up Essential Liberty to
purchase a little Temporary Safety, deserve neither Liberty nor Safety."
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --
Asterisk-Users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
