> -----Original Message----- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] On Behalf Of > [EMAIL PROTECTED] > Sent: Monday, June 12, 2006 2:09 PM > To: [email protected] > Subject: Re: [Asterisk-Users] use AT320 international call > > > On 6/12/2006, "Min Qiu" <[EMAIL PROTECTED]> wrote: > >Hi all, > > > >The firmware I used is pa168s_iax2_us_151011.bin. > > > >My problem is the handset dial before I finished key in all > >the numbers, no matter how fast I managed to press the keys. > >It appeared it always dialed immediately, for example "011862", > >when I actually ment to dial 0118620xxxxxxxx. Thus left the > >remaining numbers "0xxxxxxxx" unsent. > > > >The handset had its dial plan disabled. It configured to use > >iax protocol. My extensions.conf has this: > > > >exten=_01186.,1, dial(SIP/<voipprovider>,60) > > > >and it works fine with other iaxy and Cisco ATA. > > > >Anyone encounter this symptom? Can you share your experience? > > > >Thanks, > > > >Min > > Min _ I amybe shooting in the dark here but - are you using > inband DTMF?
You hit the target. The default is inband DTMF and I did not change it (do have the knoweldge to configure it). I'll try the other option. Thanks for the help. Min > > My AT320 only dials after I hit the Dial button or it times > out. I do NOT > use inband DTMF. > > Brett > _______________________________________________ > --Bandwidth and Colocation provided by Easynews.com -- > > Asterisk-Users mailing list > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users > _______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- Asterisk-Users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
