[Asterisk-Users] Polycom 601 problems with multiple registrations

Brian Vincent $C$ Wed, 21 Jun 2006 11:14:35 -0700

I’m stumped on this one and any help would be greatly appreciated.

I’m just trying to get my Polycom 601 to have multiple extensions on it. For example, on line 1 I want extension 21, on line 2 I want extension 22, and on line 3 I want extension 23. Ideally I’d actually have each extension appear on 2 lines and therefore filling up all 6. I should be able to do that with the reg.x.lineKeys parameter. Anyway, I’m not even at the point of getting multiple registrations to work, so I’ll worry about that later. Right now the only thing that works is registering the first extension – it registers just fine and works as expected. No matter what extension I put on there it works, but I only have line 1 working. What am I doing wrong?

Okay, now my config. I’ve got a REALLY basic set up. I copied the files off the wiki from krisk.org. I completely removed ipmid.cfg temporarily so it wouldn’t interfere with this (putting it back in place has no effect). That leaves me with just sip.cfg and the phone cfg file. I’m booting with FTP. I know the config files are loading correctly because I can make changes and they do have an effect. Here’s the phone20.cfg file for the phone:

<?xml version="1.0" encoding="UTF-8" standalone="yes"?>

<reg

reg.1.address="21"

reg.1.auth.userId="21"

reg.1.auth.password="21"

reg.1.server.1.address="10.20.0.1"

reg.2.address="22"

reg.2.auth.userId="22"

reg.2.auth.password="22"

reg.2.server.1.address="10.20.0.1"

reg.3.address="23"

reg.3.auth.userId="23"

reg.3.auth.password="23"

reg.3.server.1.address="10.20.0.1" />

</phone1>

And sip.cfg:

<!--

$Revision: 1.57.2.1 $ $Date: 2004/07/27 00:23:34 $

-->

<sip>

<server voIpProt.server.1.address="10.20.0.1" voIpProt.server.1.port="5060" voIp

Prot.server.1.transport="UDPonly" voIpProt.server.1.expires="3600" voIpProt.serv

er.1.register="1" voIpProt.server.1.retryTimeOut="0" voIpProt.server.1.retryMaxC

ount="0" voIpProt.server.1.expires.lineSeize="30"/>

</requestValidation>

</SIP>

</voIpProt>

<dialplan dialplan.impossibleMatchHandling="2" dialplan.removeEndOfDial=

"1">

<digitmap dialplan.digitmap="[2-9]11|0T|011xxx.T|[0-1][2-9]xxxxxxxxx|[2-9]xxxxxx

xxx|[2-9]xxxT" dialplan.digitmap.timeOut="3"/>

<server dialplan.routing.server.1.address="" dialplan.routing.server.1.port="506

0"/>

<emergency dialplan.routing.emergency.1.value="911" dialplan.routing.emergency.1

.server.1="1"/>

</routing>

</dialplan>

<level>

</level>

</logging>

</sip>

-------------------
Brian Vincent
Copper Mountain Telecom
[EMAIL PROTECTED]

______________________________________________________________________________________________________________

Confidentiality Warning: This message and any attachments are intended only for the use of the intended recipient(s),
are confidential, and may be privileged. If you are not the intended recipient, you are hereby notified that any review,
retransmission, conversion to hard copy, copying, circulation or other use of this message and any attachments is strictly
prohibited. If you are not the intended recipient, please notify the sender immediately by return e-mail, and delete this
message and any attachments from your system. Thank you.
______________________________________________________________________________________________________________

_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --


Asterisk-Users mailing list
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users

[Asterisk-Users] Polycom 601 problems with multiple registrations

Reply via email to