Hello we have an * setup using a TE405P with a crossover to a
Dialogic PRI card. The machine with the Dialogic card is an automated
call generator. The asterisk machine is being used as a test platform
to answer the incoming calls play an audio file then record the
incoming audio. This set up has been working nicely when the calls
were coming in on a SIP channel.
However when call come in on the PRI it seems that * randomly drops
all channels. Some times every 30 seconds sometimes every 10 minutes.
The * CLI> will get the errors shown below. I have seen similar
postings about this error but found no explanation or solution.
The asterisk machine has no shared interrupts.
Could this be a cabling issue?
Write to 36 failed: Unknown error 500
Short write: 0/15 (Broken pipe)
-- Executing Hangup("Zap/2-1", "") in new stack
!! Got I-frame while link state 0
-- Hungup 'Zap/2-1'
!! Got S-frame while link down
!! Frame got rejected!
== Primary D-Channel on span 1 up
-- Executing Hangup("Zap/1-1", "") in new stack
Brian Stuart
Edulink Systems, Inc.
1(888)338-7177 ext. 219
http://www.edulinksys.com/
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --
Asterisk-Users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
