RE: [Asterisk-Users] Avaya 4610sw SIP setup problem

Henk Thu, 29 Jun 2006 12:17:22 -0700

Did you try to manually to change the parameters of the phone? When you power the phone up then are you able to enter manually the parameter when you hit *. I am using a 4610 with Release 2.2 but I am not using the capability to upload the settings from the server.

Henk

From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Herchi Silviu
Sent: donderdag 29 juni 2006 15:55
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: RE: [Asterisk-Users] Avaya 4610sw SIP setup problem

I just tried serving the files off Apache, port 80, no change... Most parameters are taken into account by the phone, except for SIP proxy and SIP registrar...

Coud someone post an excerpt from their 46xxsettings.txt where I could see the format they use?

Thank you in advance,

Silviu

From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Tom Lynn
Sent: 29 June 2006 00:33
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: Re: [Asterisk-Users] Avaya 4610sw SIP setup problem

I too am using 2.2.2, but I'm loading my config files via HTTP. I was having some difficulty when I was using TFTP. Things were not as reliable for me, so I switched to HTTP. I've been stable since.

On 6/28/06, Herchi Silviu <[EMAIL PROTECTED]> wrote:

Hi Tom,

Thank you for your interest in my problem, I really am desperate about this thing...

I have tried several versions one after another, and now I'm using the one released on 04.07.2006 (SIP release 2.2.2).

Thanks,

Silviu

From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]] On Behalf Of Tom Lynn
Sent: 28 June 2006 05:35
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: Re: [Asterisk-Users] Avaya 4610sw SIP setup problem

Which version of firmware are you using?

On 6/27/06, Herchi Silviu <[EMAIL PROTECTED]> wrote:

Hi all,

I've been pulling my hair out for two days over this problem… I did *a lot* of Googling around, I searched the list archives to no avail - no one has the same problem!

I have two Avaya 4610sw phones. I installed the latest SIP firmware using the TFTP server. So far everything looks good. Each time the phone boots, it retrieves the 46xxsettings.txt from the TFTP server. My problem is that the SIP PROXY, SIP DOMAIN and SIP REGISTRAR are simply ignored. The phone does take into account other values (WEB PROXY, etc), but it keps displaying "Registering…" for ever. When I check the IP adresses, the SIP Proxy and Registrar fields are empty.

This is not a network problem, I have made traces using Ethereal and I can see the right .txt file being transferred. Other settings in the file are applied too, just the SIP proxy and registrar are empty… I have tried specifying them with and without quotes, by hostname, by IP address, … Nada.

It is all the more frustrating that everybody seems to have it working easily! Please help.

Here is the contents of my 46xxsettings.txt file :

SET DOMAIN mycompany.com
SET DNSSRVR 204.140.111.43
SET PHNCC 352
SET PHNDPLENGTH 4
SET PHNIC 00
SET PHNOL 0
SET SYSLANG English
SET APPSTAT 1
SET RESTORESTAT 1
SET AGCHAND 0
SET AGCHEAD 0
SET AGCSPKR 0
SET SNTPSRVR "204.140.111.200"
SET DSTOFFSET "1"
SET DSTSTART "1SunApr2L"
SET DSTSTOP   "LSunOct2L"
SET GMTOFFSET "-5:00"
SET DATESEPARATOR   "/"
SET DATETIMEFORMAT "3"
SET DIALPLAN     "[234]xxx|55xxxx"
SET DIALWAIT     "3"
SET MUSICSRVR    ""
SET MWISRVR      ""
SET PHNNUMOFSA   "3"
SET REGISTERWAIT 120
SET SIPDOMAIN " sip.mycompany.com"
SET SIPPROXYSRVR "204.140.111.219 "
SET SIPPORT "5070"                              (this is not a typo)
SET SIPREGISTRAR "204.140.111.219"
SET SP_DIRSRVR 10.1.1.1
SET SP_DIRSRVRPORT 389
SET SP_DIRTOPDN ou=People,o= avaya .com
IF $MODEL4 SEQ 4602 goto SETTINGS4602
IF $MODEL4 SEQ 4610 goto SETTINGS4610
IF $MODEL4 SEQ 4620 goto SETTINGS4620
IF $MODEL4 SEQ 4621 goto SETTINGS4621
IF $MODEL4 SEQ 4622 goto SETTINGS4622
IF $MODEL4 SEQ 4625 goto SETTINGS4625
IF $MODEL4 SEQ 4630 goto SETTINGS4630
goto END
goto END
SET WMLHOME http://support.avaya.com/elmodocs2/avayaip/4620/home.wml
SET WMLPROXY 204.140.111.249
SET WMLPORT 3128
goto END
goto END
goto END
goto END
goto END
SET WEBHOME http://support. avaya.com/elmodocs2/avayaip/4630/index.htm
SET PHNEMERGNUM 112
goto END

_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --

Asterisk-Users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users

_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --


Asterisk-Users mailing list
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users

RE: [Asterisk-Users] Avaya 4610sw SIP setup problem

Reply via email to