When you dial directly you are bypassing
the zap and just dialing an internal extension. So that is probably why dialing
directly works. As far as the cross over cable between ports 1 and 2 I have
never attempted something like that before.
-----Original Message-----
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]] On Behalf Of Ralph Liebessohn
Sent: Friday, July
07, 2006 6:38 AM
To: Asterisk Users Mailing List -
Non-Commercial Discussion
Subject: [asterisk-users] Test E1
channel
Hi guys,
I need to make a configuration to test a E1 channel, so, in the same context I
created two extensions:
exten => 555666,1,Dial(Zap/1/5556662)
exten => 5556662,1,Dial(SIP/test)
On the E1 card I linked with a cross cable the ports 1 and 2. The leds are
signaling that the connection is ok.
But when I call 555666 the calling don't goes to client SIP/test .
If I call directly 5556662 rings on SIP/test.
Do I have to config something else to receive calls on E1 channels?
On monday the real E1 channel will be installed and I must test it.
--
Ralph Liebessohn
ICQ: 74835911
Skype: liebessohn
|
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
