Eduardo,
Hmm, the coax is 75ohm correct? Also, since you are pushing the signal
a little over 250ft you will probably need to set a different LBO value
in the "span=" line. I'd probably try 1 or 2 (assuming a DSX-1
interface).
THX/BDH
On Tue, 2003-11-04 at 14:10, Eduardo Goncalves wrote:
> On Tue, 4 Nov 2003 12:46:35 -0600 (CST)
> Martin Pycko <[EMAIL PROTECTED]> wrote:
>
> > If you use TE410P make sure you have a recent zaptel from CVS.
> >
> > Martin
> >
>
>
> My card is E400P.. About the cable lenght. The cables are like this:
>
> [telco]----about 250 feet, bnc cable----[baloon]---short LAN cable--[*]
>
>
> Eduardo
>
>
> _______________________________________________
> Asterisk-Users mailing list
> [EMAIL PROTECTED]
> http://lists.digium.com/mailman/listinfo/asterisk-users
>
_______________________________________________
Asterisk-Users mailing list
[EMAIL PROTECTED]
http://lists.digium.com/mailman/listinfo/asterisk-users
