Daniel ANDRE wrote:
I have the MGCP Firmware and call transfer doesn't work in my
configuration.
this is my mgcp.conf with working call transfer:
[general]
port = 2427
bindaddr = 192.168.1.253
[192.168.1.92]
threewaycalling=yes
transfer=yes
callwaiting=yes
callwaitingcallerid=yes
host=192.168.1.92
context=local
nat=no
;dtmf=inband
disallow=all
allow=g711
allow=alaw
callerid = John <92>
line => aaln/1
[192.168.1.91]
threewaycalling=yes
transfer=yes
callwaiting=no
callwaitingcallerid=no
host=192.168.1.91
context=local
nat=no
;dtmf=inband
disallow=all
allow=g711
allow=alaw
callerid = Mary <91>
line => aaln/1
--
SUNTEQ s. r. o.
Hviezdoslavova 9 # Prievidza # 971 04 # Slovak republic
Tel: +421-46-5430 754 # Fax: +421-46-5439 144
http://www.sunteq.sk/
------------------------------------------------------------
A mind is like a parachute... it only works when it's open.
_______________________________________________
Asterisk-Users mailing list
[EMAIL PROTECTED]
http://lists.digium.com/mailman/listinfo/asterisk-users
