I have added these lines and still no transfert menu on my IP10S
Regards,
Daniel
Pavel Litvinenko wrote:
Marian Danisek wrote:
Daniel ANDRE wrote:
I have the MGCP Firmware and call transfer doesn't work in my configuration.
this is my mgcp.conf with working call transfer: [general] port = 2427 bindaddr = 192.168.1.253
[192.168.1.92] threewaycalling=yes transfer=yes callwaiting=yes callwaitingcallerid=yes host=192.168.1.92 context=local nat=no
add the next:
callgroup=0 cancallforward=yes transfer=yes
;dtmf=inband disallow=all allow=g711 allow=alaw callerid = John <92> line => aaln/1
[192.168.1.91] threewaycalling=yes transfer=yes callwaiting=no callwaitingcallerid=no host=192.168.1.91 context=local nat=no ;dtmf=inband disallow=all allow=g711 allow=alaw callerid = Mary <91> line => aaln/1
-- Daniel ANDRE (mailto:[EMAIL PROTECTED]) IRIS Technologies - http://www.iris-tech.com Serveur kwartz - http://www.kwartz.com
_______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users
