dmesg | grep x100p
also
im almost positive(correct me if im wrong anyone) you do NOT
need ztdummy
i repeat, do NOT need ztdummy with x100p
then rmmod zaptel && rmmod wctdm && modprobe zaptel && modprobe wctdm
or wctfxo or w/e
let me know how this works out
(post the section for your x100p from zaptel.conf and zapata.conf if you
could m8)
Hi,
I have problem to set up an X100P clone card.
Installation of zaptel was successful.
Also modprobe of zaptel, ztdummy and wcfxo without problems.
kernel: wcfxo: module not supported by Novell, setting U taint flag.
kernel: ACPI: PCI Interrupt 0000:05:04.0[A] -> GSI 16 (level, low) -> IRQ
193
kernel: wcfxo: DAA mode is 'FCC'
kernel: Found a Wildcard FXO: Generic Clone
kernel: Registered tone zone 0 (United States / North America)
But if I do #ztcfg -vvv no channels will be found.
the log file reports me: kernel: Registered tone zone 0 (United States /
North
America)
Iam quite sure that zaptel.conf is correct.
fxsks=1
loadzone=us
defaultzone=us
So Iam not sure what happened here, I have found that this clone as used by
many others, so it should work.
thanks....
best regards
Frank
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
_________________________________________________________________
Express yourself instantly with MSN Messenger! Download today - it's FREE!
http://messenger.msn.click-url.com/go/onm00200471ave/direct/01/
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
