Hi, i tried w/o ztdummy but nothing changed. any ideas?
zaptel.conf ------------------ fxsks=1 loadzone=us defaultzone=us zapata.conf -------------------- [channels] language=en context=incoming signalling=fxs_ks usecallerid=yes echocancle=yes transfer=yes echocanclewhenbridged=yes channel => 1 # modprobe zaptel && modprobe wcfxo kernel: zaptel: module not supported by Novell, setting U taint flag. kernel: Zapata Telephony Interface Registered on major 196 kernel: Zaptel Version: SVN-tag-1.2.6-r1096 Echo Canceller: KB1 kernel: wcfxo: module not supported by Novell, setting U taint flag. kernel: ACPI: PCI Interrupt 0000:05:04.0[A] -> GSI 16 (level, low) -> IRQ 193 kernel: wcfxo: DAA mode is 'FCC' kernel: Found a Wildcard FXO: Generic Clone kernel: Registered tone zone 0 (United States / North America) # lsmod | grep zaptel zaptel 201732 1 wcfxo crc_ccitt 2176 1 zaptel # ztcfg -v Zaptel Configuration ====================== 0 channels configured. > dmesg | grep x100p > > also > im almost positive(correct me if im wrong anyone) you do NOT > need ztdummy > i repeat, do NOT need ztdummy with x100p > > then rmmod zaptel && rmmod wctdm && modprobe zaptel && modprobe wctdm > or wctfxo or w/e > > let me know how this works out > (post the section for your x100p from zaptel.conf and zapata.conf if you > could m8) > > >Hi, > > > >I have problem to set up an X100P clone card. > >Installation of zaptel was successful. > >Also modprobe of zaptel, ztdummy and wcfxo without problems. > > > >kernel: wcfxo: module not supported by Novell, setting U taint flag. > >kernel: ACPI: PCI Interrupt 0000:05:04.0[A] -> GSI 16 (level, low) -> IRQ > >193 > >kernel: wcfxo: DAA mode is 'FCC' > >kernel: Found a Wildcard FXO: Generic Clone > >kernel: Registered tone zone 0 (United States / North America) > > > > > >But if I do #ztcfg -vvv no channels will be found. > > > >the log file reports me: kernel: Registered tone zone 0 (United States / > >North > >America) > > > >Iam quite sure that zaptel.conf is correct. > >fxsks=1 > >loadzone=us > >defaultzone=us > > > >So Iam not sure what happened here, I have found that this clone as used > > by many others, so it should work. > > > >thanks.... > > > >best regards > > > >Frank > >_______________________________________________ > >--Bandwidth and Colocation provided by Easynews.com -- > > > >asterisk-users mailing list > >To UNSUBSCRIBE or update options visit: > > http://lists.digium.com/mailman/listinfo/asterisk-users > > _________________________________________________________________ > Express yourself instantly with MSN Messenger! Download today - it's FREE! > http://messenger.msn.click-url.com/go/onm00200471ave/direct/01/ > > _______________________________________________ > --Bandwidth and Colocation provided by Easynews.com -- > > asterisk-users mailing list > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users _______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
