You could put the phone in a context such as context=restricted in sip.conf
In extensions.conf put a context
[restricted]
exten => _.,1,Answer
exten => _.,2,Authenticate(8675301)
exten => _.,3,Goto(whateverdialcontext,whateverexten,whateverpriority)
replace Allison's recording for authenticate with your own.
Unless I am totally missing what you are trying to do.
Thanks,
Steve
Eric "ManxPower" Wieling wrote:
"[9507]" is the incoming User ID. "user=8407" is the outgoing User
ID. Do you really want them to be different?
Dial() will stop processing of the dialplan until the call ends. Do
you really want this?
"r" option to Dial will force a ringing sound to the caller, even if
the caller should be hearing a "all circuits are busy", or "your call
cannot be completed as dialed" or similar message. Do you really want
that?
[EMAIL PROTECTED] wrote:
Thanks for the response, its looks logical, for some reason the
authentication is not working for me, I'm using a Linksys Phone
adapter and here is a sample dial plan in extensions.conf and also
SIP channels.
exten => 8407,1,Dial(SIP/8407,80,rt) ; permit transfer
exten => 8407,n,Authenticate(9461) exten =>
8407,n,Playback(pbx-invalid)
exten => 8407,n,Hangup()
and in sip.conf
[9507]
type=friend
user=8407
secret=xxxxxxxxxx
;context=from-sip
callerid=8407
host=dynamic
nat=yes
qualify=yes
canreinvite=no
dtmfmode=rfc2833
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
