> -----Original Message----- > From: Anthony Rodgers [mailto:[EMAIL PROTECTED] > Sent: Tuesday, July 25, 2006 4:21 PM > To: Asterisk Users Mailing List - Non-Commercial Discussion > Subject: Re: [asterisk-users] Caller ID on Transfers > > > The 'o' option to the Dial() command, along with using blind > transfers, > fixed this problem for us.
Well, for a moment there I thought we had it. Although, as I said earlier, this should never work. When you hit transfer, enter a new number and press send, the call setup is attended at that point. The caller id has already been sent to the new phone before you get the chance to hit the transfer button a second time and release the call, or make it unattended. Anyway, I put 'o' in the dial string, but it made no difference. exten => 2944093,1,Dial(SIP/2944093,20,tro) exten => 3254103,1,Dial(SIP/3254103,20,tro) exten => 9220371,2,Dial(SIP/9220371,20,tro) Can someone post a relevant sip.conf section so I can compare? Here's mine for 3254103... [3254103] type = friend context = pbx_betty_start username = 3254103 secret = foo accountcode = 3254103 qualify = no canreinvite = no host = dynamic callgroup = 1 pickupgroup = 1 dtmfmode = rfc2833 ;nat = no mailbox = [EMAIL PROTECTED] allow = g729 Doug. _______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
