Doug Lytle wrote:
Are you using the channel bank to bring inbound analog lines to your
Asterisk setup, or are you using it to supply dial tone to your
facility for things like fax or modems?
I guess this doesn't really make any difference.
As long as one side is a T1 cross over and the other side is a regular
straight though lan cable, if the jacks are wired correctly, you should
get AIS briefly, before both lights go out.
You can take a regular straight though cable and plug it into the green
and the other end into the red. You should get a yellow AIS light on
send-in and receive-in. If you don't, then your jacks are probably the
issue.
Mine is:
T1 cross over from Red jack to T110P (Going by the picture on the Wiki).
Straight though from Green jack to channel bank.
Doug
--
Ben Franklin quote:
"Those who would give up Essential Liberty to purchase a little Temporary Safety,
deserve neither Liberty nor Safety."
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
