Carlos Chavez wrote:
So, you ask the MFC/R2 software to get up to 10 digits of ANI, and are then surprised when it does? :-\ Maybe asking for zero digits of ANI would work better :-)I am trying to get my Asterisk server to talk to a Panasonic D500 PBX using an E1 connection. The card for the Panasonic uses MFC/R2 and I have installed Unicall. Calls from the Asterisk server to the Panasonic go through without a hitch and I can call any extension I want. The problem is that I cannot get any calls from the Panasonic. I have the following log from a call:According to the Panasonic tech person the problem is that Asterisk insists on getting the Group C request for a callerid. I tried to disable callerid in unicall.conf but the result was always the same. I have mx,10,4 so after I get the first four digits I get the protocol error. I know many people have integrated with PRI, but the card on the panasonic does not support that.
Steve _______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
