On 11:24, Fri 25 Aug 06, Andrew Kohlsmith wrote: > Digium hardware echo cancellation cards also require you to say > "echocancel=yes" in zapata.conf. The zaptel driver recognizes that the card > possesses echo cancellation hardware and does not engage the software echo > canceller for those channels. > > To summarize: if you want echo cancellation on Zaptel channels, you must > enable it (echocancel=yes, or a number of taps) in zapata.conf. If hardware > echo cancellation exists, it is used over software echo cancellation. Note > that if hardware echo cancellation hardware is detected, the # of taps is > ignored and the hardware uses whatever it has internally. > > echocancel=no/off in zapata.conf will disable the echo cancellation in > Zaptel, > whether it is hardware-based or software-based.
thnx, I'll now go back to reading docs before I say anything stupid again. -- Michiel van Baak [EMAIL PROTECTED] http://michiel.vanbaak.eu GnuPG key: http://pgp.mit.edu:11371/pks/lookup?op=get&search=0x71C946BD "Why is it drug addicts and computer afficionados are both called users?" _______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
