This works for me on my SPA-3000 ver 3.1.10(GWd). <Ring_Waveform>Trapezoid</Ring_Waveform>
Then back to default. <Ring_Waveform>Sinusoid</Ring_Waveform> PAP2-NA shouldn't be any different. Regards -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Daniel Salama Sent: Friday, August 25, 2006 6:27 PM To: Non-Commercial Discussion Asterisk Subject: [asterisk-users] Linksys PAP2 Ring Settings I have a few PAP2-NA that are being "mass configured" using the instructions on the wiki for the Sipura mass configuration. However, I need to make sure the following settings are in place as follow: Under the Regional Tab, I need the Ring Waveform to be Trapezoid instead of Sinuzoid and the Synchronized Ring to be Yes instead of No. I made an entry in the XML file for Synchronized_Ring which works just fine. However, no matter what I use for the Ring Waveform (Waveform, Ring_Waveform, Regional_Ring_Waveform), the setting is always the default (Sinuzoid). Does anyone know what the XML tag name/ settings need to be for changing the Ring Waveform? Thanks, Daniel _______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users _______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
