I think this is a known problem that was fixed in v1.3. I think you need to do this upgrade using a 'put' install via tftp client rather than trying to configure it to 'get' from a tftp server. It's been awhile so my memory is a bit foggy. I used pumpKIN. http://kin.klever.net/pumpkin/
-----Original Message----- From: Jean-Louis curty [mailto:[EMAIL PROTECTED] Sent: Wednesday, August 30, 2006 9:07 AM To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: [asterisk-users] upgrade problem on IP phone 9133i hi everybody, I bought few units for evaluation but we were not able to upgrade the firmware to 1.4 , it's currently set at 1.2, when we go to the webadmin page, whether we try to change the IP of the tftp server or the firmware name and set values, the reply is always Invalid IP address Please try again if we change the value via the phone itself , the tftp ip is changed but the firmware does not come up .... we are sure of our tftp server since it's used to upgrade other phones from other brands .... any idea ? _______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
