2006/8/31, shadowym <[EMAIL PROTECTED]>:
I don't remember all the details. I think you have to set the IP of the PC with the TFTP client as the tftp server on the phone. I seem to recall something about the name of the file as well. Again, it's quite foggy as I did this about a year ago so sorry I can't be of more help. I remember getting those packet fails too until I set up all the parts correctly. The documentation for the phone should have all the info. If I could figure it out I'm sure you can.
From: Jean-Louis curty [mailto:[EMAIL PROTECTED]]Sent: Wednesday, August 30, 2006 2:14 PM
To: Asterisk Users Mailing List - Non-Commercial DiscussionSubject: Re: [asterisk-users] upgrade problem on IP phone 9133i
good idea!
I tried but it doesn't work either...
[08/30/06 23:12:33] UDP packet receive failed
[08/30/06 23:12:33] Invalid opcode (0) during transfer received
[08/30/06 23:12:34] Sending ' firmware.st' to '192.168.0.101'
[08/30/06 23:12:34] UDP packet receive failed
[08/30/06 23:12:34] Invalid opcode (12800) during transfer received
[08/30/06 23:12:43] UDP packet receive failed
[08/30/06 23:12:43] Invalid opcode (12800) during transfer received
[08/30/06 23:12:44] UDP packet receive failed
[08/30/06 23:12:44] Invalid opcode (12800) during transfer received
[08/30/06 23:12:53] UDP packet receive failed
[08/30/06 23:12:53] Invalid opcode (12800) during transfer received
[08/30/06 23:12:54] UDP packet receive failed
[08/30/06 23:12:54] Invalid opcode (12800) during transfer received
2006/8/30, shadowym <[EMAIL PROTECTED]>:I think this is a known problem that was fixed in v1.3.
I think you need to do this upgrade using a 'put' install via tftp client
rather than trying to configure it to 'get' from a tftp server. It's been
awhile so my memory is a bit foggy. I used pumpKIN.
http://kin.klever.net/pumpkin/
-----Original Message-----
From: Jean-Louis curty [mailto:[EMAIL PROTECTED] ]
Sent: Wednesday, August 30, 2006 9:07 AM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: [asterisk-users] upgrade problem on IP phone 9133i
hi everybody,
I bought few units for evaluation but we were not able to upgrade the
firmware to 1.4 , it's currently set at 1.2, when we go to the webadmin
page,
whether we try to change the IP of the tftp server or the firmware name and
set values, the reply is always
Invalid IP address
Please try again
if we change the value via the phone itself , the tftp ip is changed but the
firmware does not come up ....
we are sure of our tftp server since it's used to upgrade other phones from
other brands ....
any idea ?
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
_______________________________________________ --Bandwidth and Colocation provided by Easynews.com --
asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
