Zeeshan Zakaria wrote:
Hi everybody,
My client had just installed a PRI in his office for his phone line,
with 30 DIDs. Main phone number ends in 1900 and DIDs last 4 digits
are from 3570 to 3599. Now when caller calls number ending in 1900,
call comes in with DID 1900, and asterisk answers it. Second caller
calls, call comes in again as DID 1900, asterisk rejects it because
the line is busy. So the caller gets message from the PSTN side, that
line is busy.
My understanding was that caller will call number ending with 1900 and
call will come in on Asterisk with DID 3570. Another caller will call
and call will come in as DID 3571. And this was supposed to be done by
the PRI service provider
Thats not correct. The call will come in with whatever the user
dialed. If he dialed XXX1900 then you will see 1900. If he dialed
XXX3570 then you will see 3570. If you want to handle multiple callers
simultaneously dialing the same number then setup a queue or handle them
which ever way you prefer.
.
Am I doing something wrong here, do I have to configure something in
Asterisk, or do I have to call the service provider. They say that
everything is ok on their side and our system needs to be configured
properly.
--
Zeeshan A Zakaria
------------------------------------------------------------------------
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
