That's exactly what happens: When I pick up the handle, this is what I get: -- Extension 's' in context 'from-inside' from '11' does not exist. Rejecting call on channel 0/2, span 2
Do you know what to do in the dialplan? Best regards, Henrik Woffinden Tim St. Pierre wrote: > Could you send us some CLI output? > > Look for something like this > > Invalid extension "s" in context <whatever your dial context is> > > It could be that lifting the handset without dialing is opening a channel to > the "s" extension, since there are no digits being dialed. There is a > workaround for this, but it means creating a dialplan that produces dialtone > and waits for digits. > > -Tim > > > On September 8, 2006 14:44, Henrik Woffinden wrote: > >> Hi, >> >> I'm using Asterisk 1.2.10-BRIstuffed-0.3.0-PRE-1s. >> I've got 3 ISDN phones attached. >> >> When I want to dial out I can do it in 2 ways.. >> 1) Type in number with handle still on.. Lift handle and we dial the >> number >> 2) Lift handle and then press the number >> >> Both methods should work, but only the first does. >> With the second I expected a dialtone but it goes immedately to busy >> signal. No dialtone first. >> Why is that? >> > > > ------------------------------------------------------------------------ > > _______________________________________________ > --Bandwidth and Colocation provided by Easynews.com -- > > asterisk-users mailing list > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users > _______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users