Remove immediate=yes from /etc/asterisk/zapata.conf
Henrik Woffinden wrote:
That's exactly what happens:
When I pick up the handle, this is what I get:
-- Extension 's' in context 'from-inside' from '11' does not
exist. Rejecting call on channel 0/2, span 2
Do you know what to do in the dialplan?
Best regards,
Henrik Woffinden
Tim St. Pierre wrote:
Could you send us some CLI output?
Look for something like this
Invalid extension "s" in context <whatever your dial context is>
It could be that lifting the handset without dialing is opening a channel to
the "s" extension, since there are no digits being dialed. There is a
workaround for this, but it means creating a dialplan that produces dialtone
and waits for digits.
-Tim
On September 8, 2006 14:44, Henrik Woffinden wrote:
Hi,
I'm using Asterisk 1.2.10-BRIstuffed-0.3.0-PRE-1s.
I've got 3 ISDN phones attached.
When I want to dial out I can do it in 2 ways..
1) Type in number with handle still on.. Lift handle and we dial the
number
2) Lift handle and then press the number
Both methods should work, but only the first does.
With the second I expected a dialtone but it goes immedately to busy
signal. No dialtone first.
Why is that?
------------------------------------------------------------------------
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
