But that's the whole freaking problem!!! If I could do that, I would. But Asterisk keeps on sending the "484 Address incomplete" message, and the Polycom keeps on waiting silently and patiently for me to put in the needed extra digit(s).
When I pick up my home phone, and I forget a number, the phone company does wait a few seconds for the last digit. But there is a timeout, and eventually I get a fast busy. That`s what I want. And apparently, I can`t get that. Mike -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Eric "ManxPower" Wieling Sent: September 8, 2006 6:23 PM To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: Re: [asterisk-users] What don't I get about SIP? Not much you can do about that other than: exten => _X.,1,Playback(dial-real-number-you-moron) exten => _X.,2,Hangup Mike wrote: > That's a good idea, and I tried, but as far as I know the digitmap > setting of the Polycom allows me to enable the phone to dial > automatically after a pattern is used (ex : [9]xxxxxxxxxx), but it > doesnt allow me to consider a too short string as being invalid (ex > if I miss a digit and just dial > 9-555-55-5555 and then press "send". > > Am I wrong? Cause did try the above example, and I got a 484 response > back... > > Mike > > -----Original Message----- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] On Behalf Of Eric > "ManxPower" Wieling > Sent: September 8, 2006 5:49 PM > To: Asterisk Users Mailing List - Non-Commercial Discussion > Subject: Re: [asterisk-users] What don't I get about SIP? > > Mike wrote: >> It's not a silly idea, I've been doing some sniffing and debugging >> with my limited knowledge of the whole process. I found this in the >> debug stream after having dialed "965"). >> >> Notice this line: SIP/2.0 484 Address Incomplete. >> >> Is this what I was suspecting, that it knows it could match a pattern >> (_9XXXXX) with a few more digits and so waiting for those digits from >> the user? How can I disable this or turn it off? The Polycom 501 >> "supports 484 responses", but how can I either: >> 1) Disable it in the phone >> 2) Disable it in Asterisk > > I didn't even know that Polycom supported 484. > > Update the dialplan on your Polycom to make sure it will never send a > partial number. You will no longer have to press Dial then either. > _______________________________________________ > --Bandwidth and Colocation provided by Easynews.com -- > > asterisk-users mailing list > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users > > > _______________________________________________ > --Bandwidth and Colocation provided by Easynews.com -- > > asterisk-users mailing list > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users > _______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users _______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
