I don't know if this helps, but this is how my 80+ Polycom phones are
set up.
<dialplan dialplan.impossibleMatchHandling="0" dialplan.removeEndOfDial="0">
<digitmap
dialplan.digitmap="9,1[2-9]xx[2-9]xxxxxx|9,[2-9]xxxxxx|[2-8]xxx|9,[2-9]11|911|1x|9,011x.T|*xx"
dialplan.digitmap.timeOut="5"/>
Mike wrote:
Here it is:
<dialplan dialplan.impossibleMatchHandling="1"
dialplan.removeEndOfDial="1">
<digitmap dialplan.digitmap="[7]xx|[9]xxxxxxxxxxT|[9][1]xxxxxxxxxxT"
dialplan.digitmap.timeOut="3"/>
When I dial 845, I get fast busy. When I dial 9-555-555-5555, it dials
without the need to press send. All good result.
When I dial 9-555-5 and wait, nothing happens....
Mike
-----Original Message-----
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Eric
"ManxPower" Wieling
Sent: September 8, 2006 7:14 PM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: Re: [asterisk-users] What don't I get about SIP?
What IS your Polycom dialplan, and do you have the digit.impossiblematch
set?
Eric "ManxPower" Wieling wrote:
Then you are doing something else wrong. If the call gets to Asterisk
then the exten => lines I gave should match if they are in that context.
I use this all the time.
Mike wrote:
But that's the whole freaking problem!!!
If I could do that, I would. But Asterisk keeps on sending the "484
Address incomplete" message, and the Polycom keeps on waiting
silently and patiently for me to put in the needed extra digit(s).
When I pick up my home phone, and I forget a number, the phone
company does wait a few seconds for the last digit. But there is a
timeout, and eventually I get a fast busy. That`s what I want. And
apparently, I can`t get that.
Mike
-----Original Message-----
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Eric
"ManxPower" Wieling
Sent: September 8, 2006 6:23 PM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: Re: [asterisk-users] What don't I get about SIP?
Not much you can do about that other than:
exten => _X.,1,Playback(dial-real-number-you-moron)
exten => _X.,2,Hangup
Mike wrote:
That's a good idea, and I tried, but as far as I know the digitmap
setting of the Polycom allows me to enable the phone to dial
automatically after a pattern is used (ex : [9]xxxxxxxxxx), but it
doesn’t allow me to consider a too short string as being invalid (ex
if I miss a digit and just dial
9-555-55-5555 and then press "send".
Am I wrong? Cause did try the above example, and I got a 484
response back...
Mike
-----Original Message-----
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Eric
"ManxPower" Wieling
Sent: September 8, 2006 5:49 PM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: Re: [asterisk-users] What don't I get about SIP?
Mike wrote:
It's not a silly idea, I've been doing some sniffing and debugging
with my limited knowledge of the whole process. I found this in
the debug stream after having dialed "965").
Notice this line: SIP/2.0 484 Address Incomplete.
Is this what I was suspecting, that it knows it could match a
pattern
(_9XXXXX) with a few more digits and so waiting for those digits
from the user? How can I disable this or turn it off? The Polycom
501 "supports 484 responses", but how can I either:
1) Disable it in the phone
2) Disable it in Asterisk
I didn't even know that Polycom supported 484.
Update the dialplan on your Polycom to make sure it will never send
a partial number. You will no longer have to press Dial then either.
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
