So the config is stored in one db shared between two asterisk? What you need to do is setup an IAX trunk between the two machines and then tell it to dial UA2 on the local machine, and then the extension for UA2 on the 2nd asterisk. Setup both the same on the other machine.
Now do you have the users always fixed to one machine? You would need to figure a solution for CDR and voicemail of not... CDR and voicemail you can do in a database as well.. On 9/15/06, unplug <[EMAIL PROTECTED]> wrote:
How can I make this work (UA1 makes call to UA2)? If I issue a command Dial(SIP/UA2), the call will fail. Someone in the forum said that Asterisk doesn't support the configuration below. But I am thinking about the possibility to make it works. Anyone can share if it really works? UA1 UA2 ------NAT1 ------------NAT2 | | | | Asterisk1 Asterisk2 \ / \ / --------- (ARA) DB---------------- _______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
_______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
