On 9/17/06, Andrew Joakimsen <[EMAIL PROTECTED]> wrote:
So the config is stored in one db shared between two asterisk?
Yes, the configuration files are shared between them.
What you need to do is setup an IAX trunk between the two machines and then
tell it to dial UA2 on the local machine, and then the extension for UA2 on the 2nd asterisk. Setup both the same on the other machine.
Do you mean my configuration works? Could you express it a little bit more?
On 9/15/06, unplug <[EMAIL PROTECTED]> wrote: > How can I make this work (UA1 makes call to UA2)? > If I issue a command Dial(SIP/UA2), the call will fail. Someone in > the forum said that Asterisk doesn't support the configuration below. > But I am thinking about the possibility to make it works. Anyone can > share if it really works? > > UA1 UA2 > ------NAT1 ------------NAT2 > | | > | | > Asterisk1 Asterisk2 > \ / > \ / > --------- (ARA) DB---------------- > _______________________________________________ > --Bandwidth and Colocation provided by Easynews.com -- > > asterisk-users mailing list > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users > _______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
_______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
