I can't answer definitively in regard to the Smartnet, but I only see the US
and ASIAPAC versions SKU'd up with US Cisco distributors (Ingram, Comstor,
TechData) and I do not see an EU version on the GPL.
Cory J Andrews
++++++++++++
VOIPSupply.com
454 Sonwil Drive
Buffalo, NY 14225
++++++++++++++
voice - 800.398.VoIP X3402
email - [EMAIL PROTECTED]
AIM - B2CORY
----- Original Message -----
From: "Patrick" <[EMAIL PROTECTED]>
To: "Asterisk Users Mailing List - Non-Commercial Discussion"
<[email protected]>
Sent: Tuesday, September 19, 2006 10:32 PM
Subject: Re: [asterisk-users] Cisco 7960 part numbers ...
On Tue, 2006-09-19 at 19:58 -0400, Cory Andrews wrote:
[snip]
What you would need would be the following.
(1) Cisco CP-7960G= (Global Spare)
(1) Cisco SW-SM-UL-7960= (SIP & MGCP License for Single 7960 IP Phone)
(1) CON-SNT-7960 (Smarnet 8X5 NBD IP Phone 7960 MGR Set)
You will also need a Cisco authorized telephony partner to register
your smartnet contract for you, based on the serial number of the
phone you purchase. When you receive the phone, and your contract is
registered, you can go to Cisco's website, apply for a CCO login, and
your login permissions will allow you to download the SIP firmware.
You can then migrate your phone firmware from SCCP to SIP, or your
reseller may do so for you.
If you are not in the US, you will need the (ASIAPAC) version of the
Smartnet contract.
Thanks for the info, good to know. One question: do Europeans also need
to order the ASIAPAC version of the smartnet contract or is there also a
European version?
Regards,
Patrick
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
