Asterisk Users, I am looking to see if anyone has a dial plan setup to use a secondary PRI. We have two campuses, each with it's own PRI (for telco going to a single span digium card) and a 10MB fiber link between the two for data. All calls are transfered between the two campuses via the 10MB data line and outgoing calls are made on the campus'es PRI. I am loking to see if there is a way to tell the server if one PRI is full (all 23 channels are in use) or not available to try routing the call through the other campus and it's PRI. Anyone doing this already? I am not sure how to have asterisk check to see if a PRI is down for making the call. I guess I could just add the call route to the other campus just below the my default call route. So if the primary call route fails, it will just go to the next line being the other campus.
WDYT? Thanks _______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
