Does anyone have this working? I have a Cisco 7970 with the 8-0-2-SR1S
firmware loaded on it. I can get the phone to register with * just fine
when I place my asterisk server on the same subnet and do no NAT. When I
give my asterisk server a static public IP and put the phone behind a
NAT to connect to the server registration fails. I turn on sip debugging
and see that the phone is trying to register but it gets 401
Unauthorized. The same phone config is being used with only
modifications to the IPs of the proxy and some NAT settings. I've
adjusted NAT settings in two places (phone config and sip.conf).
Example:
sip.conf
change "nat=never" to "nat=yes"
Phone config:
change
<natEnabled>0</natEnabled>
<natAddress></natAddress>
to
<natEnabled>1</natEnabled>
<natAddress></natAddress>
Does anyone have a similar setup with a 7970 behind NAT to an asterisk
server that is not behind NAT? Any help or thoughts would be greatly
appreciated.
Jeremiah
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
