Hello, I have it working on distinguising just the local numbers of our 4 B channels and the number assigned to the group. I have ordered an '100 in-dial range' here in Australia and should have it available to me by the end of next week, I can let you know how it goes.
Regards, Matthew Enger [EMAIL PROTECTED] Quoting Michal Rybarik <[EMAIL PROTECTED]>: > Hello all, > > does anybody have experiences with DDI on ISDN BRI? I would like to > order DDI with 10 or 100 numbers from telco company, and use DDI > numbers for direct calling SIP/H323 clients. But I don't know if > Asterisk supports it, in archive I found only one answer about it, and > I'm not sure. I am going to use it with isdn4linux card. > > Maybe DDI is called differently in other countries, I'll explain - > normally customer gets a few (3 or 8 in Slovakia) MSNs for his ISDN > BRI line, for example 7895601 (-03). With DDI 100, customer gets > number for example 78956xx and he can assign two digits (100 > extensions) as he wants. Telco equipment must be configured to support > DDI, otherwise it will not possible to make or recieve calls. PBXs > generally supports it, telephones not. > > Thanks a lot, > > -- > Michal Rybarik > 21.sk > > _______________________________________________ > Asterisk-Users mailing list > [EMAIL PROTECTED] > http://lists.digium.com/mailman/listinfo/asterisk-users > ---------------------------------------------------------------- This message was sent using IMP, the Internet Messaging Program. _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users
