The only problems I have:
+ echo can be bad sometimes
+ DTMF on outbound, seems that the ISDN transmits it outofbound which
means that if your receiving end if a PSTN line, your DTFM code does not
do much. Anyone got a solution to this?
Regards,
Matthew Enger
[EMAIL PROTECTED]
On Wed, 2003-11-12 at 08:50, Michal Rybarik wrote:
> Hello Siggi,
>
> >> I have it working on distinguising just the local numbers of our 4 B channels
> >> and the number assigned to the group. I have ordered an '100 in-dial range'
> >> here in Australia and should have it available to me by the end of next week, I
> >> can let you know how it goes.
>
> SL> Cool. That would make 100 virtual voice modems with I4L ;-)
>
> Only 2 (4, 6, ...) modems - depends on how much ISDN B channels you
> have - but with 100 dialing numbers. Every number can use any free
> channel, when it needs. Currently I plan only 1 or 2 BRI ISDN, so
> there will be possible to have 2 or 4 simultanous calls, but if I
> need, I can upgrade to ISDN PRI / E1 line with 30 channels and keep my
> numbers.
>
> SL> I guess you'd rather use chan_capi if you're needing more than a handful
> SL> of numbers!
>
> Is there any problem with it, while using I4L? I doesn't have any
> good experiences with CAPI under Linux. We tried AVM Fritz! ISDN card
> w/ CAPI under Linux two years ago, but without success.
>
> --
> Michal Rybarik
> 21.sk
>
> _______________________________________________
> Asterisk-Users mailing list
> [EMAIL PROTECTED]
> http://lists.digium.com/mailman/listinfo/asterisk-users
--
Matthew Enger <[EMAIL PROTECTED]>
Xintegration
_______________________________________________
Asterisk-Users mailing list
[EMAIL PROTECTED]
http://lists.digium.com/mailman/listinfo/asterisk-users
