|
I am going to reply inline as you asked
many questions I have two questions. Sure, you do!! First I am running a t400p with three fxo
ports signalling fxs (inbound CO lines). I have six polycom 501's. The problem
is the amount of time the call setup takes. I have done this with Mitel phones
before with a t-1 and had the same problem. My customer always complains about
the call setup time. Am I doing something wrong or is this how it is. It takes
up to five seconds to pickup or start ringing the CO. I would be happy to
supply fake ringback if anyone knows how to do that. You can add the r command to your Dial
string to ‘fake ringback’ However the CLI is your friend in this
case. How long does it take after dialing on the polycom for the console to
reflect it is dialing? If it is right away, you may have a problem with your CO
lines, and how many digits it is expecting before placing the call. Second Problem is SIP Polycom phone line
programming, I have read many contradicting things. How should it be
provisioned to allow multiple incoming calls. How many lines,calls per line and
the rest of the bull, Iknow loaded question. I am using kewl start on those
three lines by the way I set 6 lines per key on my Polycoms that
works for 501 and 601. Calls just keep coming IN!!! . |
_______________________________________________ --Bandwidth and Colocation provided by Easynews.com --
asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
