Hello, If I am to understand what you wrote "The TDM400P (TDM22) will be damaged if the I plug the analog telephone line into the port 3 (which by the way is for the outside line connection via (PSTN) when it should be in port 1 or 2.
I initially had it setup properly and after speaking with two different support techs at digium without having the remotely connect to the server I still did not have a dial tone. I experimented here in the office. I took a phone where I do I have a dial tone and plugged it in the card with the proper changes and the phone does not have a dial tone. I plug the newly purchased analog phone into the jack of the other phone and I receive a dial tone. Since installing this brand new card it has always worked this way. Digium support changed the text files by instructing me to do so. Reply? Ed -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Rich Adamson Sent: Saturday, October 07, 2006 11:31 AM To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: Re: [asterisk-users] No Dialtone If you've messed up in connecting telephone lines to the wrong module, the ringing voltage sent to a fxs module will destroy it. You would need to replace the module. Eddie Johnson Jr wrote: > Yes, I have and I received the following: > > In zapata.conf your first two channels should be fxs_ks because the first > two modules are FXO mdoules. Your last two channels should be fxo_ks because > the second two modules are FXS modules. > > For the TDM400P(TDM 22) the FXS modules work with the phone. The 3 port is > for the line. So I unplugged it from port 3, and plugged the analog phone > in port 1, made the changes to the channels and set immediate=no, restart > the server and activated asterisk. Nothing, my friend. > > Any more suggestions, > > Ed > > -----Original Message----- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] On Behalf Of Francesco > Francesconi > Sent: Friday, October 06, 2006 10:23 AM > To: Asterisk Users Mailing List - Non-Commercial Discussion > Subject: Re: [asterisk-users] No Dialtone > > Did you set immediate=no in zapata.conf? > > Francesco > > Eddie Johnson Jr wrote: >> >> >> Hello, >> >> >> >> I have the following setup: >> >> >> >> 1. Ubuntu Dapper Server 6.06 plus latest patches >> >> >> >> 2. Asterisk 1.2.11 >> >> >> >> 3. libpri 1.2.3 >> >> >> >> 4. Zaptel 1.2.8 >> >> >> >> 5. Digium TDM22 (TDM400P) >> >> >> >> 6. Analog phone plugged in port 3 >> >> >> >> 7. The wctdm, zaptel modules load at startup, I type asterisk as root and >> >> it is activated. >> >> >> >> 8. I check the Channel Map and I have the following: >> >> >> >> >> >> Channel map: >> >> >> >> Channel 01: FXO Kewlstart (Default) (Slaves: 01) >> >> Channel 02: FXO Kewlstart (Default) (Slaves: 02) >> >> Channel 03: FXS Kewlstart (Default) (Slaves: 03) >> >> Channel 04: FXS Kewlstart (Default) (Slaves: 04) >> >> >> >> 4 channels configured. >> >> >> >> I can ssh into the server and remotely connect to the server. Great! >> The card is not connected to an outside line as of yet but I have no >> dialtone on the phone. I spoke with a rep. at digium and was told a >> dialtone should be there. >> >> >> >> Zaptel.conf : >> >> >> >> >> >> loadzone=us >> >> defaultzone=us >> >> fxoks=1,2 >> >> fxsks=3,4 >> >> >> >> Zapata.conf: >> >> >> >> ;FXS Modules >> >> signalling=fxo_ks >> >> channel => 1,2 >> >> ; >> >> ;FXO Modules >> >> signalling=fxs_ks >> >> channel => 3,4 >> >> >> >> I made sure the card is not sharing an IRQ, I checked the hard drive >> and all is well. I load zttool and get the following: >> >> >> >> cat /proc/zaptel/* >> >> Span 1: WCTDM/0 "Wildcard TDM400P REV I Board 1" >> >> >> >> 1 WCTDM/0/0 >> >> 2 WCTDM/0/1 >> >> 3 WCTDM/0/2 >> >> 4 WCTDM/0/3 >> >> >> >> Any suggestions? >> >> >> >> Ed >> >> >> >> ------------------------------------------------------------------------ >> >> _______________________________________________ >> --Bandwidth and Colocation provided by Easynews.com -- >> >> asterisk-users mailing list >> To UNSUBSCRIBE or update options visit: >> http://lists.digium.com/mailman/listinfo/asterisk-users >> > > _______________________________________________ > --Bandwidth and Colocation provided by Easynews.com -- > > asterisk-users mailing list > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users > > _______________________________________________ > --Bandwidth and Colocation provided by Easynews.com -- > > asterisk-users mailing list > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users _______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users _______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
