Hello Jay, I initially had it setup properly and after speaking with two different support techs at digium without having them remotely connect to the server I still did not have a dial tone. I experimented here in the office. I took a phone where I do I have a dial tone and plugged it in the card with the proper changes and the phone does not have a dial tone. I plug the newly purchased analog phone into the jack of the other phone and I receive a dial tone.
Since installing this brand new card it has always worked this way. Digium support changed the text files by instructing me to do so. Ed -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Jay R. Ashworth Sent: Saturday, October 07, 2006 12:21 PM To: [email protected] Subject: Re: [asterisk-users] No Dialtone On Sat, Oct 07, 2006 at 10:31:16AM -0500, Rich Adamson wrote: > If you've messed up in connecting telephone lines to the wrong module, > the ringing voltage sent to a fxs module will destroy it. You would need > to replace the module. I'm going to stick my neck out here, and opine that any FXS module that would be destroyed by receiving ringing voltage is *incredibly* poorly designed, and very probably wouldn't pass Part 68. "Shouldn't", certainly. Cheers, -- jra -- Jay R. Ashworth [EMAIL PROTECTED] Designer Baylink RFC 2100 Ashworth & Associates The Things I Think '87 e24 St Petersburg FL USA http://baylink.pitas.com +1 727 647 1274 "That's women for you; you divorce them, and 10 years later, they stop having sex with you." -- Jennifer Crusie; _Fast_Women_ _______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users _______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
