We have a solution like this working just fine for almost a year. We are
using qurad card for that. It is a good idea to have both PRI on one card.
CLID shouldl remain the same.
Vlad
----- Original Message -----
From: "Forrest Beck" <[EMAIL PROTECTED]>
To: "Asterisk Users List" <asterisk-users@lists.digium.com>
Sent: Monday, October 09, 2006 8:18 PM
Subject: [asterisk-users] T1 Passthrough
I want to setup a asterisk server with two T1 spans (two TE110P
cards). The server will have one card connected to the PRI and the
other will connect to our Norstar Meridian ICS system. I want to have
a very simple dial plan for the context that the PRI card will be
assigned to something like this. Note that our telecom provider sends
final three digits of the phone number:
SPAN 1
Channels 1-23
g1
context: pri_incoming
SPAN 2
Channels 25-48
g2
context: norstar_ics
[pri_incoming]
exten => _XXX,1,Dial,ZAP/g2/${EXTEN}
My questions are:
Will I need to set the callerid before routing to the next span, or
will the three digits remain intact.?
and
Has anyone tried this? and if so do you forsee any problems i will run
into?
This is all theroey in my head right now, since I am awaiting the
second cards arrival.
Thanks.
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
