On 10/21/06, Leo Ann Boon
<[EMAIL PROTECTED]> wrote:
Massimiliano Stucchi wrote:
> On 201006, 10:06, Giorgio Incantalupo wrote:
>
>> Hi Doug,
>> I do not use extensions.conf so I cannot show anything but I can assure
>> that I do not set the callerid except for parameters inside zapata.conf:
>>
>> usecallerid = yes
>> callerid = asreceived
>>
>
> I guess the problem is at the telco's side, since the CLI that is shown
> seems to be the first one of the numbering scheme. I suppose what you
>
That's the default ISDN behavior. If you don't set the caller id, it
will always send the pilot number. The usecallerid and callerid are for
incoming, when used on a trunk. They don't apply to outgoing calls. You
need to set the callerid if you want the DDI number to be sent instead
of the pilot number.
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
_______________________________________________ --Bandwidth and Colocation provided by Easynews.com --
asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
