Andrew Joakimsen wrote:
Shouldn't it also acquire the callerid of whatever device placed the
call? IE: IP phones callerid= in sip.conf or even the phone itself?
A little clarification: when you send callerid out to the PSTN, it has
to match the format of the PSTN. Suppose your phone extension is 1000,
naturally its caller ID is 1000. That's fine and well for internal
calls. For an external call: when the PBX sends 1000 to the PSTN, the
exchange will reject it and send the pilot number instead. You'll need a
translation rule to map the your extension to the DDI you want to send
to the PSTN.
It's similar in Cisco CM, you need to apply a Calling Party Mask to make
sure your caller ID will be sent in the correct format.
Leo.
On 10/21/06, *Leo Ann Boon * <[EMAIL PROTECTED]
<mailto:[EMAIL PROTECTED]>> wrote:
Massimiliano Stucchi wrote:
> On 201006, 10:06, Giorgio Incantalupo wrote:
>
>> Hi Doug,
>> I do not use extensions.conf so I cannot show anything but I
can assure
>> that I do not set the callerid except for parameters inside
zapata.conf:
>>
>> usecallerid = yes
>> callerid = asreceived
>>
>
> I guess the problem is at the telco's side, since the CLI that
is shown
> seems to be the first one of the numbering scheme. I suppose
what you
>
That's the default ISDN behavior. If you don't set the caller id, it
will always send the pilot number. The usecallerid and callerid
are for
incoming, when used on a trunk. They don't apply to outgoing
calls. You
need to set the callerid if you want the DDI number to be sent instead
of the pilot number.
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com
<http://Easynews.com> --
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
<http://lists.digium.com/mailman/listinfo/asterisk-users>
------------------------------------------------------------------------
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
