Dan, can you supply your ooh323.conf for me? I would like resolve my
issue with not recognizing dtmf by ooh323 from callmanager
my ooh323 is quite simple, also on callmanager config page for gateway
to asterisk is nothing special, no faststart, no mtp; ccm v4.1.3sr3a
[general]
disallow=all
allow=alaw
;faststart=no
;h245tunneling=no
[ccm]
type=peer
ip=192.168.40.7
port=1720
;dtmfmode=rfc2833
;dtmfmode=h245signal
;h245tunneling=no
;faststart=no
Dan Austin wrote:
On the DTMF issues with chan_ooh323, I've used the channel with
CCM 4.0, 4.1 and 5.0 with no issues. At one point I tested all
of the DTMF methods ooH323 provides. CCM definately works with
h245signal, and in the past has worked with q931keypad and
h245alphanumeric. Cisco's support of RFC2833 in CCM has not
been impressive. It works OK as of CCM 5.0 with SIP, but still
not so solid with H323.
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
