Something like:
Try RxLevel -60
PreRoaming Enable RxLevel -75
Try over TxErrcnt 15
Try Over RxError Count 10
Play with the PreRoaming mode, see if it does help? It should however you could notice a drop in battery life.
Would be a good place to start with your settings, adjust from there. I would like to hear your results with these phones, is everything working great besides the roaming?
Good day all
I cant get my WIP 5000 to roam 100%
I have 2 access points, different SSI's
I make a config1 and config2 on the phone, each for the different SSID's(A & B)
Im standing next to A and I walk to B, but…the phone does not want to change its signal to B, it still keeps the bad signal from A
If I power A down, it will switch to B, if I switch A back on and go stand next to it, it will still keep B's signal
We got some wireless specialist's in and they set up WDS for us, in other words, you add 1 SSID for both access point
IT works for windows, but not for the phone!
Can anyone help, or give a bit more explanation on the roaming settings on the webconfig
Try RxLevel (-103~0)
PreRoaming Enable RxLevel (-103~0)
Try Over TxError Count (0~10000)
Try Over RxError Count (0~10000)
Level Diff Higher Than Curr Site (0~255)
Use Refresh PreRoaming
Enable PreRoaming On Association
PreRoaming Mode
PreRoaming Refresh Interval (0:Disable, 0~3600)
Thanks
Altus
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
_______________________________________________ --Bandwidth and Colocation provided by Easynews.com --
asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
